Can anyone help?

[Dan540NY]

I just purchased the blacked out headlights from Dodge. I need help on how to install these light's. Have no clue at all. I have a 2008 1500 Quad Cab. Any help would be great. I'm also a new member.

Danny.

[jwhiteh]

A friend of mine was talking about it(same truck as you) and I think there are two screws up behind and then come right out...how to get to them?? Not sure. Through the wheel well or the bumper

[RapidTransit]

Hi Dan, welcome aboard! Any luck getting those headlights installed?

[Dan540NY]

No luck at all. I took two torx screw's from the front and one in the wheel well. The one in the wheel well you have to take a plastic cap off the wheel well itself and then you can undo the nut . But after undoing all three it still would not come free. It was pissing me off. It is raining out here in New York too. That didn't help. Anyone can shed some light on this? lol, I want these on already. Thank" for the repy folk's.

Danny.

[jwhiteh]

He says there are the three nuts/screws and he said you will feel like you are going to break it. There is a ball socket holding it in and you have to pull REALLY hard. Don't be affraid!

He is telling me (right now) to grab it an pull really F-ing hard!!! Lol. He had to take them off when he installed his new bumper..

[Dan540NY]

Got It!!! Lmfao I was messing with that white spherical plastic cone and tryed pulling it and it eventally popped off. So yeah three screws two in the front and one in the wheel well behind a rubber grommet and you pull with alittle tension not alot but enough to pop the ball out of the plastic sphere. Got it done in the rain too 1/2 hour. The truck looks amazing since i blacked out everything on the truck. Thanks guy's. Thanks jwhiteh!!!!

Danny

[Dan540NY]

My next upgrade will be Volant ram air intake and throttle body spacer. Any one have any advice please feel free to tell. Lomfao!!!! Very helpful site.

Danny

[jwhiteh]

Glad to help! Do it. I put a TBS on my 94 and love it