head lights

[lil red wagon]

i have a 2008 1500 hemi with a 4" lift on it. i can seem to figure out how to adjust the headlights. they are shining to low after i got it lifted. Anyone know how to adjust them.

[Tbird100636]

HEADLAMP ALIGNMENT

NOTE: Due to the linear nature of the headlamp cutoff, a properly aimed low beam headlamp will project the top edge of the high intensity pattern even with the headlamp horizontal reference line on the alignment screen. No horizontal (right/left) adjustment is required for this headlamp beam pattern. The high beam pattern will be correct when the low beams are properly aimed.

1. Turn the headlamps ON and select the LOW beams.
2. Rotate the headlamp vertical adjustment screw (2) on the inboard side of each front lamp unit housing (1) to adjust the beam height as required.

https://w05.dealerconnect.chrysler.com/service/mds2002/serviceInfo/en_US/169700.jpg

[lil red wagon]

thanks tbird. have seen that but thought it was for the side to side alignment. thanks for the help.